Details
Terracotta Rainscreen System is the only wall material brands that has the state level R &D Technology Center in China. Terracotta Panel Products include Natural Surface, Line Surface ,Glazed Surface, Grooved Surface, Sand Surface, Embossed Surface, etc.
Terracotta panel can be applied in many ways. They can serve as the building facade alone and in combination with Glass facade, Aluminum facade, Stone facade and ceramic tile facade, etc.
Colors
TOB Terracotta Products are available in more than 80 standard colors. The surface color and size can be customized as your request. More colors can be reached by glazing. We assure the color will be never fade.
Terracotta panel sizes
TOB Terracotta Panels are normally of a thickness of 18mm, 30mm, 20mm and 40mm. All sizes can be tailor-made.
Available Length (mm): 300 600 900 1200 1500
Available Width (mm): 200 250 300 400 450 500
Surface Texture
TOB is the only wall material brands that has the state level R &D Technology Center in China. Terracotta Panel Products include Natural Surface, Line Surface, Glazed Surface, Grooved Surface, Polished Surface, Sandblasted, Matte Finish, Glossy Finish, Marble/granite 3d inkjet Surface, Embossed Surface etc.
Technical Performance of Terracotta Products
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Terracotta cladding advantages
Why choose TOB Terracotta Panel?
1.100% Natural Material Made from clay. No chemical pigments, deployment 80
varieties colors with natural minerals
2. Full Digital Precision Control To Achiever Minimized Chromatic Aberration From the original soil testing, mineral ratio, mechanical mixing, extrusion, drying and so on, nearly 60 processes are using computer data management
3. Non-Combustible
1150-degree heat, long firing for 7 hours
4. Natural Ventilation, Noise Reduction and Environment Protection
5. Energy Efficient
6. Maintenance Free System
Terracotta panel installation
1. Bury embedded parts
2. Measurement and set the plumb-line: Checking the scene structure of size, to carry out sub-grid adjustment keel, mark the horizontal and vertical control lines for mullion installation using theodolite and level instruments
3. Install the vertical keel: Connect the vertical keel to the comer mold by means of stainless bolt, weld the comer mold and embedded parts together firmly, and adjust the perpendicularity of the vertical keel
4. Install the cotton insulation: Fix thermal insulation to concrete wall with special nail
5. Install the beam (steel cantilever): Fix the horizontal keel (steel cantilever) to the vertical pillar with self-drilling wires, and adjust the levelness of the horizontal keel
6. Install the gutter board: Install flashings at every two floor and on the top of every window in the open system Make all flashings in coherence
7. Install each unit of clay tile: Insert Aluminum hooks into terracotta's channel from sideways (insulating gaskets between them), hang the composed unit in the channel of transom, then adjust the adjustment bolt to meet the needs of terracotta panels vertical height
8. Install the clay tiles and seam tape: Install the clay tiles bottom up. Meanwhile, install seam tape to the vertical pillar in the same manner for continuity and completeness, and finish the installation of the whole curtain wall
9. Clean the surface of terracotta panels
Projects with TOB terracotta panel
http://www.tob-terracotta-panels.com/